Loading... Please wait...
  • Image 1

TRE 60lb injectors PNP BMW

Out of Stock


Product Description

6x TRE 60lb PNP High Impedance Turbo fuel injectors.

Direct plug and play for Turbo BMW's running aftermarket tune or complete standalone Ecu's.
Used on both The M20 turbos and M30 turbos.

Been proven to 400whp at around 70% dutycycle on pump gas for the M20B25.

Direct plug in- No splicing, adapters or modifying needed. These will fit into the stock fuel rail and fit the electrical connectors on all 6cyl. E30's including most swap cars.



Typical Flow Rate in LB per hour: 60 LBS/HR @ 45 PSI
Typical Flow Rate in CC per minute: 630 CC/min @ 45 PSI
Actual flow rate of your injectors may vary, but will be matched together
Resistance: 10 ohms (High Impedance, High Resistance)
Voltage: 8-15 Volts, nominal 13.5 Volts
Amperage: 1.0 Amps
Pressure: Min 30 PSIG / Max 100 PSIG
O-Rings Included: Yes, on the injectors
Injector Body Design: Metal and composite plastic
Fuel Delivery: Upgraded single fuel delivery nozzle for superior fuel atomization
Electrical connector type: EV1 (Minitimer, Jetronic)
Overall Length: 2 7/8 inches, 74 mm
O-ring to O-ring Length: 2 1/2 inches, 63 mm
Diameter: 16 mm
Orings: Top and bottom, 14.5 mm
Warranty: 1 Year Warranty! - See more at:

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!