6x Siemens Deka 60lb PNP High Impedance Turbo fuel injectors.
Direct plug and play for Turbo BMW's running aftermarket tune or complete standalone Ecu's.
Used on both The M20 turbos and M30 turbos.
Been proven to 400whp at around 70% dutycycle on pump gas for the M20B25.
Direct plug in- No splicing, adapters or modifying needed. These will fit into the stock fuel rail and fit the electrical connectors on all 6cyl. E30's including most swap cars.
Static Flow Rate (GAS): 62.7 lb/hr = 646 cc/min = 474 g/min
Dynamic Flow Rate 2.5ms PW @ 100Hz (GAS): 20.2mg/pulse
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Turn on time @ 14VDC: 1.14ms
Turn off time: 0.85ms @ 600KPa
Factory Tollerance: +/-6 %
Spray Pattern: Cone (4-Hole)
Connector: Minitimer (Bosch EV1)